Cylindrical Roller Bearings
Cylindrical Roller. All cylindrical roller bearing configurations (except RAA) provide precision control of the rollers for operation over a wide range of speeds with precision-ground, double-ribbed guide flanges on one ring. These roller bearings are found in turbine engine mainshaft, transmission and gearbox applications with high radial loads.
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by ground ribs on either the inner or outer ring. The cylindrical shape allows the inner ring to have axial movement relative to the outer ring.Cylindrical roller bearings are also available in sealed or split designs.
In sealed bearings, the rollers are protected from contaminants, water and dust, while providing lubricant retention and contaminant exclusion. This provides lower friction and longer service life.
- 25 mm x 52 mm x 18 mm NSK NU 2205 ET Cylindrical Roller Bearings
- AH3064 AOH3064 (Spec
- Open
- 105 mm x 190 mm x 36 mm NSK NU 221 W C3 Cylindrical Roller Bearings
- N/A
- Standard Stud with E
- 55 mm x 90 mm x 18 mm NSK NU 1011 M Cylindrical Roller Bearings
- 4.5 Inch | 114.3 Mil
- Yes
- 100 mm x 190 mm x 34 mm NSK NU 220 ET Cylindrical Roller Bearings
- Flange Block
- 7/16 Inch
- 105 mm x 225 mm x 49 mm NSK NJ321 M C3 Cylindrical Roller Bearings
- 55
- Teflon Labyrinth
- 50 mm x 90 mm x 20 mm NSK N 210 W C3 Cylindrical Roller Bearings
- Angular Contact Ball
- 20 Degree
- 40 mm x 110 mm x 27 mm NSK NJ 408 W Cylindrical Roller Bearings
- ASAHI BEARINGS
- AMI BEARINGS
- 50 mm x 90 mm x 20 mm NSK NJ 210 ET C3 Cylindrical Roller Bearings
- Medium
- 3.937 Inch | 100 Mil
- 150 mm x 270 mm x 45 mm NSK N 230 M C3 Cylindrical Roller Bearings
- Self Aligning Ball B
- CONSOLIDATED BEARING
